*Scented Lamps by the British brand Ashleigh & Burwood are a real gem for lovers of beautiful and at the same time practical items – they have unique designs that are not available from any other brand.
*Ashleigh & Burwood fragrance liquids available in our store in many variants and in other auctions
*Ashleigh & Burwood Fragrance Lamps are filled exclusively with A&B fillings with capacities of 250 ml, 500 ml, 1000 ml, or others, but dedicated only to catalytic lamps.
WHAT IS A SCENT LAMP AND HOW DOES IT WORK?
• The lamps work on the principle of catalytic combustion – when the burner is heated, the released aroma destroys bacteria and eliminates unpleasant odors.
• Fragrances dedicated to Ashleigh & Burwood lamps are a mixture of natural and natural plant extracts that have the aroma of exclusive perfumes.
• Aromas contain isopropyl alcohol (used for disinfection), distilled water and fragrance composition.
• Ashleigh & Burwood lamps were tested by Independent Laboratory Research, which confirmed that the lamps help destroy the most common bacteria and unpleasant odors in households.
– E. coli bacteria? 99% destroyed after 3 hours!
– Mites? 99% eliminated after 90 minutes!
– Mold spores? 3 hours and there is no trace of 99.9% of them!
– Tobacco smoke? Only half an hour is enough to say goodbye to him.
HOW TO USE THE SCENT LAMP?
1. Place the lamp on a surface resistant to stains and high temperatures. Remove the extinguisher and the catalytic stone (connected) to the wick. Using a funnel, fill the lamp with the selected fragrance insert dedicated to catalytic lamps up to 2/3 of the volume (there must be free space between the neck of the bottle and the surface of the liquid). Remember: be careful not to spill the oil, and if it does, wipe everything dry before using the lamp.
2. Place the stone with the wick back in the lamp, put on the extinguisher and leave it on the lamp for 20-30 minutes (if the stone is covered, the scent will not evaporate) to allow the wick to soak in the selected fragrance composition.
3. Remove the extinguisher, make sure the catalytic stone is properly seated and light it. Note: never touch or remove the stone when it is burned and do not leave a burning lamp unattended, as the flame can reach up to 15 cm high!
4. After 3-4 minutes, blow out the flame (never cover a burning stone with an extinguisher or a decorative cover!). At this point, the lamp starts the process of purifying the air and saturating it with the selected aroma. Use the lamp for a maximum of 30 minutes in a room of 16 m2.
5. The stone remains hot (even without a flame) throughout the entire process of releasing the fragrance, i.e. absorbing the oil through the wick. Therefore, when the lamp is working, do not move it or touch the stone. Protect it by covering it with a decorative cover.
6. To stop the odour release process, remove the decorative cover (warning: it may be hot!) and cover the stone with an extinguisher (it also protects the oil from evaporating when the lamp is not in use). Do not move the lamp for the next 30 minutes until it cools down.
7. Make sure that the selected fragrance oil does not burn out completely, as this may shorten the life of the wick. If you plan not to use the lamp for a long time, pour the oil back into the bottle.
Botanical Retreat
Fragrance Lamp
Gift Set
PCPFL701
